manualshive.com logo in svg

Redx 2505 PU, Руководство пользователя, Страница: 7 / 32

Поделиться
Скачать
Redx 2505 PU Скачать руководство пользователя страница 7

Removal of any protection, incorrect use, incorrect installation, or incorrect 

operation may result in death/serious personal injury or device damage.

Transportation, loading and unloading, installation, start-up and maintenance

must be carried out by qualified or trained engineer/technician.

Before maintenance or touching any parts, or installation, make sure that the 

energy storage unit is disconnected and wait 60 seconds to ensure that the 

internal capacitor is discharged.

Do not connect the N of grid to the N of UPS output, Do not connect the grid 

cable to the UPS output, otherwise it may cause serious damage to the system 

and load.  

Installation must be in full compliance with national and local laws and regulations.

Ensure that the system is positioned correctly and is not allowed to roll sideways

or upside down.

Do not change the internal circuit of the machine without permission.

Before connecting to the grid, system the must be connected to the Ground.  

Follow the instructions. Improper operation may cause serious damage.

There is a 4G/WIFI device inside the system, do not place the system in an 

environment where there is no 4G/WIFI signal.

60S

Danger!      

Danger!      

Danger!      

Warning!

Warning!

Warning!

Warning!

Notice

Table 1-1 - Warnings 

Rev 20220610

RX2505PU

Page 7 of 32

Содержание 2505 PU

































Отзывы:

Нет отзывов