-- 3G Wide Band Repeater (Model: PORP23W)
http:www.redutelco.com
© 2009 Redutelco | All rights reserved
8
User Manual
6 Production Operation
6.1 Notices
Follow below safety items carefully before installation, implementation,
maintenance and operation for this product
BS and MS port must be connected to donor antenna and service antenna
when powers supply on; otherwise the equipment will be damage for long
term use.
When use repeater for outdoor, the distance between donor antenna and
service antenna must be >20metes, otherwise the repeater will be damage
because isolation problem for long term use.
Donor antenna need to be lighting proof and lighting rod need to be install
for donor antenna installation pole outside
Check input power, require input power less than maximum input power of
repeater, otherwise the repeater cannot work well.
Keep clear for label and indicator on surface of repeater to be identified.
6.2 Installation
Step 1
: Start by taking phone up to the roof or other location outside to find
where the signal is strongest.
Step 2
: Temporarily mount the Donor (outside) antenna in that location. It
may need to adjust and move the antenna later.
Step 3
: Run coaxial cable into the building to a convenient location where
you can also get standard 220VAC power for the repeater.
Step 4
: Place the repeater in that location and connect the coaxial cable to
the Donor Side of the repeater and the donor antenna.
Step 5
: Mount coverage (inside) antenna in a productive location. It may
need to adjust or move the antenna later.
Step 6
: Connect coaxial cable between the coverage antenna and the
repeater output port.
