-- Wide Band Repeater (Model: PODRP20)
http:www.redutelco.com
© 2009 Redutelco | All rights reserved
9
User Manual
Step 5
: Mount coverage (inside) antenna in a productive location. It may
need to adjust or move the antenna later.
Step 6
: Connect coaxial cable between the coverage antenna and the
repeater output port.
Step 7
: Power up the system and check for signal inside the building. If
needed, tune system by moving and or pointing the Donor and Coverage
antennas until get the most signal possible.
Step 8
: Secure all antennas and cables, securely mount the repeater and
clean up the installation.
6.3 Commissioning
Item Description
Usage
BTS
Connect to Donor antenna
Receive BTS signal source
MS
Connect to Service antenna
Retransmitted signal to target coverage area
Lo ATT
Uplink attenuator (Band A)
Set repeater Uplink attenuation(Low Band)
-
Band A is 800M for 800/1900 dual band
-
Band A is 900M for 900/1800 dual band
-
Band A is 900M for 900/2100 dual band
-
Band A is 1800M for 1800/2100 dual band
Hi ATT
Uplink attenuator(Band B)
Set repeater Uplink attenuation(High Band)
-
Band B is 1900M for 800/1900 dual band
-
Band B is 1800M for 900/1800 dual band
-
Band B is 2100M for 900/2100 dual band
-
Band B is 2100M for 1800/2100 dual band
ALM
Alarm indicator
LEN ON when repeater work well
After switch on power supply, please check indication LED as following items.
