version number:
1.1.1.140508_PRO
Redsail Tech Co., Ltd
www.hflaser.com
18
4. If you are going to install the drivers from the disc insert it when advised by
Windows. If you are going to use downloaded drivers, select “I don’t have the disc.
Show me other options.”
5. Browse to the folder where the drivers are stored and click next.
6. When the wizard is complete, click the close button.
7. The Found New Hardware wizard should appear again. When it does, follow steps
2-6 again for the second driver.
If you are using another version of Windows and require specific
instructions for installing the drivers, just also according to the appeared
wizard step by step after connecting the machine and computer with
USB cable.
Once your drivers are installed you will need to make a note of the COM
port that has been assigned to your USB Cable connection.
-Finding Your COM Port
First navigate to the Device Manager by following the below instructions
for your operating system.
Windows 95/98/Me Users:
Click Start, then select Settings -> Control Panel.
Select Device Manager.
Windows 2000/XP Users:
Click Start, tRight-click “My Computer” then select Properties.
Select the Hardware tab.
Click the Device Manager.
Windows Vista/7 Users:
Click Start, then in the "Start Search" box, Type "Dev" (without pressing enter); wait
for a list to show up.
Click Device Manager.
Windows 8 Users:
Click Start, “Control Panel”---Click Device Manager
Expand the section labeled “Ports (COM & LPT)”.
Make a note of which number COM Port is associated with “USB Serial
Port”.
You will need this information to properly install your software.
