2
Activation of RedPort Optimizer CrewComm Premier Router
1. Connect the Router to Connection Source
Connect a Satellite Communications (SATCOM) terminal
(via an Ethernet cable) to the Router’s SAT port located on
the back of the router.
2. Power the Router
Insert the included 12V AC power plug (or optional 12V
DC “Cigarette Plug”) into the power port located on the
back of the router.
Electricians can hard wire the router. Doing so
voids your
warranty
, but if done properly, it will not damage the router.
It is highly recommended putting a 2-amp fuse in line to
protect the router.
Activate the RedPort Optimizer CrewComm Premier Router
NOTE: The activation of the Optimizer CrewComm
Premier Router is only required one time and requires
Pre-activation details (see CrewComm Premier Guide
redportglobal.com/support/documentation-manuals/).