Redpine Signals, Inc. Proprietary and Confidential
Page 6
User Manual
Version 1.2.1
2 WLAN Performance Test Application Usage
The OneBox-Mobile software provides applications to test Transmit and
Receive performance of the module. The Band of operation of the module
needs to be configured before performing any tests.
NOTE: Open the
common_insert.sh
file present in the “release” folder
using an editor like vim. Ensure that the DRIVER_MODE is set as below:
DRIVER_MODE = 2
COEX_MODE = 1
Run the following command to install the Driver in Performance Test
mode:
# sh wlan_insert.sh
Please type “
dmesg
” in the terminal and press enter key and check for
the below print for check if driver has been loaded properly.
Next, follow the instructions below to run the Transmit and Receive tests.
2.1 Transmit Tests
The “transmit” utility, present in the “release” folder allows the
configuration of the following parameters and starts the transmission of
packets.
1) Transmit Power
2) Transmit Data Rate
3) Packet Length
4) Transmit Mode
5) Channel Number
