Redmond RV-R650S, Руководство пользователя

Страница: 15 / 20

RV-R650S
15
GBR
UKR
KAZ
5. To go into waiting mode, press the button on the device or the on the remote,
the device will say “Cleaning suspended”, the button will be lit in green. Cleaning will
not take place during the waiting mode.
6. If the device is inactive for a long period of time it will go into sleep mode, the button
indicator goes out. During sleep mode, the device will not react to the remote control unless
the button is pressed. To exit sleep mode, press the button on the remote or the
button on the device; it will make a sound, the button will be lit in green again.
7. When work is completed, the device will say “Cleaning has been completed”, and then
return to its charging station. You can also press the button on the remote control
or the on the device to force the device to return to the charging station. In this case
the device will say “Returning to charging base”, the button will be lit a yellow.
If the charging station is switched off during cleaning, the device will say “Cleaning has been
completed, returning to start position”, and will return to where cleaning began.
If for any reason the device's return to the charging station is interrupted, the device will say
“Stop back to charging base”.
Choosing mode with remote control
You can choose the mode using the corresponding buttons on the remote control in waiting
mode or while the device is operating:
• button – automatic mode ;
• button – fast cleaning of a set area;
• button– corner cleaning mode
Fast cleaning of a set
area
The device will move in a spiral, gradually increasing
trajectory and then will turn around and move again,
but this time reducing its trajectory. For cleaning a
particularly dusty area
Automatic mode
The device will then
clean the whole area,
building a route
according to that
individual room
Press the button on the
device to launch the
device in automatic mode
Corner cleaning mode The device will move along the wall and past
obstacles, cleaning the edges of the room
To control the device manually, press and hold the movement direction buttons while the device
is in waiting mode or operating:
– forward. The device will move forward while the button is held down;
– turn left. The device will turn left on its axis while the button is held down;
– turn right. The device will turn right on its axis while the button is held down;
– backwards. The device will move backwards while the button is held down.
UV lamp
The RV-R650S robot vacuum is equipped with an ultraviolet light to destroy pathogens and
bacteria. The lamp will switch on automatically during cleaning and switch off when cleaning
is finished or if the device is removed from the surface.
Protect your eyes from ultraviolet light. Keep ultraviolet light from people and animals!
Cleaning plan function
Available on the REDMOND Robot app.
WARNING! For the function to work, make sure the the I/0 switch to the I position.
III. OPTIONAL ACCESSORIES
(sold separately)
Additional accessories are not included in the delivery package of the multicooker. You can
buy them, as well as learn about new products from REDMOND on the website www.redmond.
company or in the shops of official dealers.
RAV-R650S-R670S is a set of changeable accessories
The set includes 4 side brushes, 2 HEPA filters, 2 cloths for wet cleaning and a main brush.
IV. CLEANING AND MAINTENANCE
For maximum effectiveness, perform a full clean of the device once every two weeks. Clean the
dust compartment after each use.
Before you start cleaning the appliance, make sure that it is unplugged. Wipe the housing of
the appliance and the charging point with a damp, soft cloth. DO NOT ALLOW THE DEVICE TO
GET WET!
DO NOT place the appliance body, plug or power supply adapter under a stream of water or
submerge it in water.
DO NOT use any chemically aggressive substances or abrasive pastes, a sponge or tissue with
hard or abrasive surface.
See diagram
A4
(p. 7) for full procedure on cleaning the attachment and container for wet
cleaning,
The cleaning brushes and attachment for wet cleaning can be cleaned in running water. If necessary,
use a soft cleaning cloth.Dry completely before reuse!
To clean the dirt compartment and HEPA filter, refer to the diagram
A5
(p.8) .