Redmond RV-R150, Руководство пользователя

Страница: 15 / 20

RV-R150
15
ENG
UKR
KAZ
Service book ..............................................................................................................................................1 pc.
The manufacturer has the right to make changes in the design, configuration or package, as well
as in the technical characteristics of the product in the course of continuous improvement of its
products without further notice of these changes. The specifications allow the error of ±10%.
Parts of Appliance
(scheme
A1
, p. 3–4)
1. button with indication – start/end of
work
2. Dust collector compartment cover
3. Dust collector lid with handle
4. Dust collector
5. Dust collector compartment
6. Dust collector nozzle
7. Front bumper
8. Exhaust EPA filter holder
9. Exhaust ЕРА-filter
10. Front wheel
11. Charging contact pins
12. Rotating brushes
13. Rear wheels with auto-switch off when
removed from surface
14. Suction port
15. Turbobrush
16. Ventilation holes
17. Wet cleaning attachment
18. Container for wet cleaning
19. Water outlet
20. Dispensers
21. Remote control
22. Battery compartment
23. Charging point
24. Charging contact pins
25. Socket for connecting power adapter
26. Power adapter
27. Charging point indicator
28. I/O power switch
29. PLAN button – планирование уборки
30. HOME button – reset to charging point
31. ON/OFF button – start/end of work
32. , , , buttons – choose movement
direction
33. MODE button – choose claaning mode
34. CLK button – time setting mode
35. MAX button– turbo mode
36. Digital display
37. – return to charging station indicator
38. – current time indicator
39. – planned cleaning function indicator
40. Cleaning mode indicator
41. Week day indicator
42. Replaceable ЕРА-filter
43. Cleaning brush
I. PRIOR TO THE FIRST USE
Carefully take out the appliance and its components from the box. Remove all the packaging
materials and promotional stickers.
Be sure to keep in place warning labels, index stickers (if any) and a label with the serial
number of the appliance on its body!
After the transportation or storage at low temperatures, it is necessary to keep the appliance
at the room temperature for at least 2 hours before switching on.
Wipe the body of the appliance and all removable parts with a damp cloth and dry. Carefully
dry all parts of the device before use. Install batteries (not included) in the remote control,
taking note of polarity.
Installing the battery ensure that your hands and the unit are dry.
II. OPERATION OF THE APPLIANCE
Charging the battery
Before using the appliance, the battery must be fully charged (scheme
A2
, p. 5).
1. Connect the charging station to the power supply and install it in a flat position next to
the wall, the charging station light will switch on. If the device cannot be installed di-
rectly by the wall, place the device on any flat surface. There must not be interference at
a radius of up to two metres from the charging station to ensure that the vacuum can
return to the charging station to recharge.
2. Turn the O/I switch to the I position, the device will make a sound, the button indicator
will flash a blue.
3. Place the device on the charging station so that the charging pins touch the contacts on
the charging station. The device will make a sound, the button indicator will flash a
red. Full charge time is approximately 4 hours.
Before first use, charging the battery for 12 hours is recommended to increase service life.
4. The battery can also be charged by plugging a power adapter straight into the device.
The device will make a sound, the button will flash a red. The vacuum cleaner will not
react to button or the remote control and the planned cleaning function will be
unavailable while the power adapter is connected to the appliance.
5. When the device is fully charged, it will make a sound, the button indicator will glow
a constant blue.
WARNING! The charging station must be connected to a power supply.
When charge reaches a critical level, the device will automatically return to the charging station.
If the device is unable to return to the charging station, place it on the charging station by
hand, making sure the charging pins connect.
When storing for a long period of time, charging the battery completely and turning the I/0
switch to the 0 position is recommended.
Use the appliance
1. If necessary, use the container for wet cleaning (see scheme A3 , p. 6). Fill the container
through the special hole, lifting the lid first. Close the lid and attach the wet cleaning
attachment using the velcro on the surface of the container. Place the container in the
body of the vacuum.