BOIL-DRY PROTECTION
Should you accidentally operate the kettle without water, this
function will automatically switch off the power. If this occurs,
allow the kettle to cool prior to filling with cold water and
re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it
down completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or
allow moisture to contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never
use a poisonous cleaner.
CAUTION
: Do not use chemical, steel, wooden or abrasive cleaners
to clean the outside of the kettle to prevent the gloss loss.
3. When not use or storage, the power cord may be wound under
the power base.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits
in tap water may form scale on the bottom of kettle so as to cause
the operation less efficiency. You can use commercially available
descaler and follow the instructions on the package on how to use.
Alternatively, you may follow the below instructions using white
vinegar to clean the product.
1. Fill the kettle with 3 cups of white vinegar, then add water to the
amount so as to cover the bottom of kettle
completely. Leave the solution in the kettle overnight.
2. Discard the mixture in the kettle, then fill the kettle with clean
water to the maximum position, boil and then discard the water.
Repeat several times until the odor of vinegar has been flushed
away. Any stains remaining inside the spout can be removed by
rubbing with a damp cloth.
