background image

10

• IF SOMEONE COMES
1. Guard against hazardous situations at all times.

Warn adults to keep pets and children away
from the area. Be careful if you are approached.
Injury may result from flying debris.

2. If someone calls out or otherwise interrupts you

while working, always be sure to turn off the
engine before turning around.

MAINTENANCE

1. In order to maintain your product in proper

working order, perform the maintenance and
checking operations described in the manual at
regular intervals.

2. Always be sure to turn off the engine before

performing any maintenance or checking
procedures.

The metallic parts reach high temperatures
immediately after stopping the engine.

3. When replacing any part, or when replacing the

oil or any lubricant, always be sure to use only
RedMax  products or products which have
been certified by RedMax for use with the
RedMax product
.

4. In the event that any part must be replaced or

any maintenance or repair work not described in
this manual must be performed, please contact a
representative from the store nearest RedMax
authorized servicing dealer for assistance.

5. Do not use any accessory or attachment other

than those bearing the RedMax mark and
recommended for the unit.

6. Under no circumstances should you ever take

apart the product or alter it in any way. Doing so
might result in the product becoming damaged
during operation or the product becoming unable
to operate properly. 

WARNING

4. For safe operation

Содержание SGCX2600S























Отзывы: