RedMax 96767200101 Скачать руководство пользователя страница 12

Park Brake

The park brake is found on the left of the 

machine. Pull the lever backward to operate the 

brake and push forward to release it.

IMPORTANT INFORMATION  

The machine 

must stand still when engaging the park brake. 

Always set the park brake before dismounting. 

Release the park brake before moving the 

mower.

Motion Control Levers

The machine’s speed and direction are 

continuously variable using the two steering 

controls. The steering controls can be moved 

forward or backward about a neutral position. 

There is a neutral position, which is locked if the 

steering controls are moved out.
When both controls are in the neutral position (N), 

the machine stands still. By equally moving both 

controls forward or backward, the machine moves 

in a straight line forward or backward.

Park

Brake

Forward

Neutral

Reverse

For example, to turn right while moving forward, 

move the right control towards the neutral 

position. The rotation of the right wheel is reduced 

and the machine turns to the right.
Zero turn can be achieved by moving one control 

backward (behind the neutral position) and 

carefully moving the other steering control forward 

from its neutral position. The rotation direction 

when zero turning is determined by which 

steering control is moved backward behind the 

neutral position. If the left steering control is pulled 

backward, the machine turns to the left. Use more 

care when using this maneuver.
If the steering controls are in uneven positions 

when standing still or do not fit in the slots for 

moving the controls out, they can be adjusted.

  WARNING

! The machine can turn very 

rapidly if one steering control is moved much 

further forward than the other.

Choke Control

The choke control is used for cold starts to 

provide the engine with a richer fuel mixture.
For cold starts, pull the control up.

Ignition Switch

The ignition switch is placed on the control panel 

and is used to start and stop the engine. On 

models equipped with headlights, turn the key 

clockwise to ACCESSORY for headlight use.

12

CONTROLS

Содержание 96767200101





































Отзывы: