32
To unlock the wheelchair:
•
If the control system has switched off, press the On/Off button.
•
Deflect the joystick forwards until the control system beeps.
•
Deflect the joystick in reverse until the control system beeps.
•
Release the joystick, there will be a long beep.
•
The wheelchair is now unlocked.
5.4.2
Key Locking
To lock the wheelchair with a key;
•
With the Control System switched on, insert and remove a PGDT supplied key into the
Charger Socket on the Joystick Module. A short beep will be heard.
•
The wheelchair is now locked.
The following screen will be displayed, the next time the Control System is switched on.
To unlock the wheelchair;
•
If the control system has switched off, press the On/Off button.
•
Insert and remove a PGDT supplied key into the Charger Socket on the Joystick Module.
A short beep will be heard.
•
The wheelchair is now unlocked.
5.5
Actuator Selection Screen
To adjust the seat position the actuator screen must be visible.
Depress the Mode Button to scroll through the Mode screens until you reach the actuator screen, displayed below.
Actuator adjustment is achieved as follows.
•
Move the Joystick sideways to select the desired axis.
(This is indicated by the section of the wheelchair that is highlighted)
