Redlion DA50D Скачать руководство пользователя страница 6

6

Drawing No. LP1117

Revised 03 2020

Changing the Battery  

To change the battery of a DA50D 

Converter, first remove power 

to the unit. Insert a small 

screwdriver into the slot 

provided on the battery 

holder and pry the battery 

holder out of the unit. 

Remove the old battery 

from the holder and 

replace it with a new battery. 

To maintain UL rating, battery must be replaced with one listed in 

the Specifications.

RED LION CONTROLS TECHNICAL SUPPORT

If for any reason you have trouble operating, connecting, or 

simply have questions concerning your new DA70D Controller, 

contact Red Lion’s technical support.

Support: 

support.redlion.net

Website: 

www.redlion.net

Inside US: +1 (877) 432-9908
Outside US: +1 (717) 767-6511
Red Lion Controls, Inc. 

20 Willow Springs Circle York, PA 17406

ORDERING INFORMATION

DESCRIPTION

PART NUMBER

DA50D Single Sled Advanced Protocol Converter

DA50D 0BNN 000 0000

4G LTE (CAT4) Cellular Sled for AMER (AT&T, Generic) DA S00 CL9C4S AM000

4G LTE (CAT4) Cellular Sled for AMER (Verizon)

DA S00 CL9C4S VZ000

4G LTE (CAT4) Cellular Sled for EMEA, SAARC, APAC

DA S00 CL9C4S EU000

802.11n Wi-Fi Sled

DA S00 WF10N0 AM000

1 Port USB 2.0 Host Sled

DA S00 PN40U4 00000

Dual RS232 Ports Sled (Isolated)

DA S00 PN2221 IS000

Dual RS485 Ports Sled (Isolated)

DA S00 PN2442 IS000

Mixed RS232/RS485 Ports Sled (Isolated)

DA S00 PN2245 IS000

Spaces in listed part numbers are shown to improve readability, 

do not include when searching for or ordering these parts.

Note: Battery orientation 

MUST MATCH as shown. 

+

-

CAUTION

: Lithium battery. Danger of explosion if battery 

is incorrectly replaced. Replace only with the same or 

equivalent type recommended by the manufacturer.

ATTENTION

: Pile au lithium. Danger d’explosion si la 

batterie est mal remplacée. Remplacez-la uniquement 

par une pile du même type ou d’un type équivalent 

recommandé par le fabricant.

Please note that the old battery must be disposed of in a 

manner that complies with your local waste regulations. 

The battery must not be disposed of in fire, or in a manner 

whereby it may be damaged and its contents could come 

into contact with human skin.
Veuillez noter que la vieille pile doit être éliminée 

conformément à la réglementation locale en matière de 

déchets. La pile ne doit pas être jetée au feu, ni d’une 

manière qui pourrait l’endommager et son contenu 

pourrait entrer en contact avec la peau humaine.

Содержание DA50D







Отзывы: