Redlion CSTC, Руководство пользователя

Страница: 2 / 8

GENERAL SPECIFICATIONS (CONT’D)
6.
CERTIFICATIONS AND COMPLIANCES
:
SAFETY
UL Listed, File # E302106, UL508, CSA C22.2 No. 14-M05
LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards
IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment
for measurement, control, and laboratory use, Part 1.
ELECTROMAGNETIC COMPATIBILITY
Emissions and Immunity to EN 61326: 2006: Electrical Equipment for
Measurement, Control and Laboratory use.
Notes:
1. Criterion A: Normal operation within specified limits.
2. Criterion B: Temporary loss of performance from which the unit self-
recovers.
3. The module’s analog input and/or output signals may deviate during
disturbance, but self-recover when disturbance is removed.
4. Power supplied from backplane via Master Module.
7.
ENVIRONMENTAL CONDITIONS
:
Operating Temperature Range: 0 to +50 °C
Storage Temperature Range: -40 to +85 °C
Operating and Storage Humidity: 85% max relative humidity, non-
condensing, from 0 to +50 °C
Vibration According to IEC 68-2-6: Operational 10 to 150 Hz, 0.075 mm
amplitude in X, Y, Z direction 1 g.
Shock According to IEC 68-2-27: Operational 25 g's, 11 msec in 3 directions.
Altitude: Up to 2000 meters
8.
CONSTRUCTION
: Case body is burgundy high impact plastic. For indoor
use only. Installation Category II, Pollution Degree 2.
9.
CONNECTIONS
: Removable wire clamp screw terminal blocks
Wire Gage: 28-16 AWG terminal gage wire
Torque: 1.96-2.23 inch/lbs (0.22-0.25 N-m)
10.
MOUNTING
: Snaps on to standard DIN style top hat (T) profile mounting
rails according to EN50022 -35 x 7.5 and -35 x 15.
11.
WEIGHT
: 6 oz (170.1 g)
Class A EN 55011 Emissions
Immunity to Industrial Locations:
3 V/rms
Criterion A EN 61000-4-6 RF conducted interference
1 kV signal
1 kV L-L, 2 kV L-G power
Criterion B
EN 61000-4-5 Surge
1 kV signal
2 kV power
Criterion B EN 61000-4-4 Fast transients (burst)
Emissions:
10 V/m
Criterion B
3
EN 61000-4-3 Electromagnetic RF fields
8 kV air discharge
4 kV contact discharge
Criterion B EN 61000-4-2 Electrostatic discharge
CSTC8 SPECIFICATIONS
12.
INPUTS
:
Channels: 8 single-ended
Effective Resolution: Full 16-bit
Sample Time: 50 msec - 400 msec, depending on number of enabled inputs.
ENABLED
INPUTS
SCAN TIME
(READING RATE)
1 50 msec (20 Hz)
2 100 msec (10 Hz)
3 150 msec (6.7 Hz)
4 200 msec (5 Hz)
5 250 msec (4 Hz)
6 300 msec (3.3 Hz)
7 350 msec (2.9 Hz)
8 400 msec (2.5 Hz)
Common Mode Rejection: >110 dB, 50/60 Hz
Normal Mode Rejection: >90 dB, 50/60 Hz
Temperature Coefficient: 0.01%/°C
Step Response Time: One scan time (to within 99% of final value)
Types: T, E, J, K, R, S, B, N, C
Slope & Offset: Provides sensor error correction
Input Impedance: 20 M

Lead Resistance Effect: 0.25 μ V/

Cold Junction Compensation: Less than ±1 °C typical (±1.5 °C max) over 0
to 50 °C ambient temperature
Resolution: 0.1°
13.
TEMPERATURE INDICATION ACCURACY
: ± (0.3% of span, +1 °C).
Includes NIST conformity, cold junction effect, A/D conversion errors,
temperature coefficient and linearization conformity at 23 °C after 20 minute
warm up.
14.
PROBE BREAK RESPONSE
: Upscale drive, Input Fault Alarm bit set high,
ALM LED illuminates.
No Standard
No Standard
No Standard
No Standard
-10.00 to +56.00 mV
0 to +2315 °C
+32 to +4199 °F
Millivolt
C
W5/W6
(+) Orange
(-) Blue
(+) Orange
(-) Red
-200 to +1300 °C
-328 to +2372 °F
N
No Standard No Standard
+149 to +1820 °C
+300 to +3308 °F
B
(+) White
(-) Blue
No Standard
0 to +1768 °C
+32 to +3214 °F
S
(+) White
(-) Blue
No Standard
0 to +1768 °C
+32 to +3214 °F
R
(+) Brown
(-) Blue
(+) Yellow
(-) Red
-200 to +1250 °C
-328 to +2282 °F
K
(+) Yellow
(-) Blue
(+) White
(-) Red
-200 to +760 °C
-328 to +1400 °F
J
(+) Brown
(-) Blue
(+) Violet
(-) Red
-200 to +730 °C
-328 to +1346 °F
E
(+) White
(-) Blue
(+) Blue
(-) Red
-200 to +400 °C
-328 to +752 °F
T
BS 1843 ANSI
WIRE COLOR
MEASUREMENT
RANGE
TYPE
CSRTD6 SPECIFICATIONS
15.
RTD INPUTS
:
Channels: 6 single-ended
Effective Resolution: Full 16-bit
Sample Time: 67 msec - 400 msec, depending on enabled inputs.
ENABLED
INPUTS
SCAN TIME
(READING RATE)
1 67 msec (14.9 Hz)
2 133 msec (7.5 Hz)
3 200 msec (5 Hz)
4 267 msec (3.8 Hz)
5 333 msec (3 Hz)
6 400 msec (2.5 Hz)
Common Mode Rejection: >110 dB, 50/60 Hz
Normal Mode Rejection: >90 dB, 50/60 Hz
Temperature Coefficient: 0.01%/°C
Step Response Time: One scan time (to within 99% of final value)
Type: 2 or 3 wire
Excitation: 150
μ A
Lead Resistance: 15

Max
Resolution: 0.1°
Slope & Offset: Provides sensor error correction
16.
TEMPERATURE INDICATION ACCURACY
: Includes NIST conformity,
A/D conversion errors, temperature coefficient and linearization conformity at
23 °C after 20 minute warm up.
17.
PROBE BREAK RESPONSE
: If channel is enabled: upscale drive, Input
Fault Alarm bit set high, ALM LED illuminates.
TYPE INPUT TYPE RANGE
385 ± (0.2% of span) ± (0.1% of span)
-200 to +600 °C
-328 to +1100 °F
392 ± (0.2% of span) ± (0.1% of span)
-200 to +600 °C
-328 to +1100 °F
672
Ohms Linear resistance
± (0.2% of span) ± (0.1% of span)
-80 to +215 °C
-112 to +419 °F
± (0.2% of span) ± (0.1% of span)
0

to 300

428
50

copper,
Alpha = .00428
± (1.2% of span) ± (0.6% of span)
-50 to +200 °C
-58 to +392 °F
2
120

nickel,
Alpha = .00672
100

platinum,
Alpha = .003919
100

platinum,
Alpha = .00385
ACCURACY
0 TO 50°C
ACCURACY
18 TO 28°C