Redlion CSTC, Руководство пользователя

Страница: 1 / 8

1

DEDICATED HIGH DENSITY INPUT MODULES FOR THE
MODULAR CONTROLLER SERIES

MODELS AVAILABLE TO ACCEPT ±10 V, 0/4-20 mA,
THERMOCOUPLE AND RTD INPUTS

±10 V AND 0/4-20 mA INPUT VERSIONS FULLY SCALABLE

±10 V AND 0/4-20 mA INPUT VERSIONS AVAILABLE WITH 100
POINT LINEARIZATION

UNUSED INPUTS CAN BE DISABLED TO INCREASE OVERALL
READING RATE

IDEAL FOR DATA-ACQUISITION APPLICATIONS

AUTO ADDRESSING MINIMIZES CONFIGURATION TIME

CAN BE USED IN CONJUNCTION WITH ANY CS
SERIES MODULES
GENERAL DESCRIPTION
The Model CSTC, CSRTD, CSINI, and CSINV are 16-bit analog input
modules designed for use with the Modular Controller Series. These modules
provide a means of high-density signal measurement for data-acquisition
applications. The CSTC module accepts a wide range of thermocouple types,
while the CSRTD accepts various RTD inputs. The CSINI and CSINV accept
0/4-20 mA and ±10 V process signals, respectively.
The modules connect and communicate via a backplane connection to the
CSMSTR Modular Controller Series Master. The CSMSTR, equipped with serial
ports as well as an Ethernet port, allows the system to share data with PCs, PLCs,
and SCADA systems. The Master supports any combination of up to 16 CS series
modules, allowing a total of 128 signals to be monitored via a single Master.
Internal power management circuits allow the modules to be replaced while
power is applied, which reduces downtime. All configuration information is
stored locally within the module, as well as in the Master, so replacement
modules do not need to be configured.
The Modular Controller Series’ high density packaging and DIN rail
mounting saves time and panel space. The backplane connection provides power
and communication to the module and snaps easily onto standard top hat (T)
profile DIN rail.
CONFIGURATION
The Modular Controller Series is configured with Windows
®
compatible
Crimson
®
software. The software is an easy to use, graphical interface which
provides a means of configuration and commissioning of new systems, as well
as routine module re-calibration.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Do not use the module to directly command motors, valves, or other actuators
not equipped with safeguards. To do so can be potentially harmful to persons or
equipment in the event of a fault to the module. An independent and redundant
temperature limit indicator with alarm outputs is strongly recommended.
GENERAL SPECIFICATIONS
1.
POWER
: Derived from system backplane. (75 mA load on power input of
MASTER). Module may be hot-swapped (replaced while powered up).
2.
LEDs
:
STS
- Status LED shows module condition.
ALM
- Alarm LED is lit during any internal alarm condition.
3.
MEMORY
: Non-volatile memory retains all programmable parameters.
MASTER also stores the parameters in order to reprogram modules that are
replaced.
4.
ISOLATION LEVEL
: 500 Vrms @ 50/60 Hz for 1 minute between the
Signal Inputs and the CS Master Power Supply Input.
5.
COMMUNICATIONS
: Provided by the CS Master
MODELS CSTC, CSRTD, CSINI, CSINV -
MODULAR CONTROLLER SERIES ANALOG INPUT MODULES
Bulletin No. CS8- H
Drawing No. LP0556
Released 01/10
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
CAUTION: Risk of electric shock.
1
7
13
1.24
(126.5)
4.17 (105.9)
4.98
(31.5)
DIMENSIONS In inches (mm)
CC US LISTED US LISTED
UL
R
IND. CONT. EQ.
34AD