4
English
3
English
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
1. Connect the camera to a LAN port on your router with an Ethernet cable.
2. Use the power adapter provided to power on the camera.
Camera Introduction
Power Adapter
Router
PTZ Camera
Power Cable
Network Cable
Network Cable
Power Port(Optional)
Earth Wire
Reset Button
*Press and hold for 10seconds to restore camera to
factory settings.
Lens
Built-in Mic
Antenna
Speaker
SD Card Slot
Metal Aluminum Case
Daylight Sensor
Spotlight
Infrared Lights
