RDL-3000
FAMILY
USER MANUAL
70-00158-03-00
Proprietary Redline Communications © 2015
Page
49
of 254
April 17, 2015
GPS Position
: Display the position coordinates of the sector controller. The GPS
coordinates format is in degrees, minutes and seconds (to four decimal places) with
North / South or East / West. Click on the blue GPS position text when displayed (right of
screen) to launch the pop-up map screen.
Fig. 23: Web - GPS MAP Screen
Redundancy Status
: (SC only) Status of the redundancy feature.
Refer to
1+1 Device Redundancy Configuration (SC only)
. The redundancy fields are
visible only when enabled by the options key (
).
Off
- Redundancy feature is disabled on this unit.
Primary Active
- This unit is Primary and is controlling the sector (RF active).
Primary Inactive
- This unit is Primary and is in standby mode (RF disabled).
Backup Active
- This unit is Backup and is controlling the sector (RF active).
Backup Inactive
- This unit is Backup and is in standby mode (RF disabled).
Redundancy Peer Status
: (SC only) Status of the redundancy feature on the peer.
Refer
to
1+1 Device Redundancy Configuration (SC only)
.
The redundancy fields are visible only
when enabled by the options key
(
).
Off
- This unit can not synchronize status with peer. Possible reasons include:
1.
Peer redundancy is disabled or is not available (options key)
2.
Peer IP address is not correct (wireless configuration)
3.
No IP connectivity to peer (cables or routing)
Primary Active
- The peer is Primary and is controlling the sector (RF active).
Primary Inactive
- The peer is Primary and is in standby mode (RF disabled).
Backup Active
- The peer is Backup and is controlling the sector (RF active).
Backup Inactive
- The peer is Backup and is in standby mode (RF disabled).
Noise Level 1
: (SC only) Noise floor measurement for RF port 1.
Noise Level 2
: (SC only) Noise floor measurement for RF port 2.
