Redline Engineering RTS3000, Инструкция по сборке

Страница: 22 / 23

To balance your vehicle on the rotisserie, remove the bolts that pin the T carriage in place and rotate the
balancing head at point M to raise or lower the car. It is important the center of gravity of the car be
aligned with the rotating axis of the rotisserie, signified below with a long white line. As you begin to
spin the car, if the car is properly balanced, it will get neither or easier nor harder to rotate the gear
drive handle. If this is not the case, follow the steps below.
Example 1:
The handle gets harder and harder to turn as you begin to spin the car.
Stop rotating the car and return it back to the upright position. This means the center of gravity of the
car is too low. Rotate the balancing head at point M to raise the car. Repeat this process until it is
balanced. This DOES NOT require adjustment of the hydraulic bottle jack.
Example 2:
The handle gets easier and easier to turn as you begin to spin the car.
Stop rotating the car and return it back to the upright position. This means the center of gravity of the
car is too high. Rotate the balancing head at point M to lower the car. Repeat this process until it is
balanced. This DOES NOT require adjustment of the hydraulic bottle jack.