Redline Communications AN-50e, Руководство пользователя

Страница: 54 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 54 of 100
Group settings apply to ingress/egress packets at the sector controller Ethernet
port. Connection settings apply to ingress/egress packets at the subscriber station
Ethernet port.
Each ingress packet received on the Ethernet port of the sector controller or
subscriber station is classified into one of two types. See the following table for a
description of these types.
Table 19
:
VLAN - Packet Classification
Type Description
Tagged
Traffic
Packet has a VLAN tag, and there is a group or connection configured
with this VID.
Packets received on the Ethernet port are classified according to
membership in a group (sector controller) or connection (subscriber
station). Identified packets are forwarded over the wireless link to all
connections the associated group, where the packets are forwarded to
the local Ethernet Port.
Pass-
Through
Traffic
The packet does not have a VLAN tag, or the packet has a VLAN tag but
no group or connection is configured with this VID.
All untagged and unassigned packets are assigned to the pass-though
group. If the pass-through group is enabled, each packet is forwarded
over the wireless link to all connections configured for the pass-through
group, where the packets are forwarded to the local Ethernet Port.
If no pass-through group is configured, all packets identified as pass-
through traffic are discarded.