Redline Communications AN-50e, Руководство пользователя

Страница: 51 / 100

AN-50e
user manual
70-00033-01-03 Proprietary Redline Communications © 2005 September 2005
Page 51 of 100
3.8.3 Link Configuration Screen
Use the Link Configuration screen to configure the wireless parameters for each
subscriber station.
Figure 19
:
Web - Link Configuration Screen
Link Name : Enter a name for this link. This name is displayed with the Link ID
on information and statistics screens.
Link ID : (Read only) A unique two-digit Link ID is generated automatically when
a new link is added.
Peer MAC : Enter the MAC address of the subscriber station. The sector controller
only registers a subscriber station if the MAC address has been entered using the
link configuration screen.
Max. DL Burst Rate : Select the maximum downlink burst rate for unicast traffic
from the sector controller to the subscriber (based on link budget calculations).
Max UL Burst Rate : Select the maximum uplink burst rate for unicast traffic
from the subscriber to the sector controller (based on link budget calculations).
The uplink and downlink settings ensure that bandwidth opportunities are
distributed correctly based on service level agreements. Use the Redline PMP
Configuration Tool for assistance in determining appropriate values for load-
balancing.