RedKnows SBX-3 Series, Руководство пользователя и инструкция по установке

Страница: 13 / 21

13
R
F G
P
S G
S
M S
Y
S
Knapp för
inlärning
av
fjärrkontroll
LED för
inlärning
av
fjärrkontroll
SIM-
korthållare
GPS LED GSM LED SYS LED
The red GPS LED is blinking when position is found. It normally takes a minute or so after
power on until position is found but the fi rst time the GPS is used it can take up to one hour.
In power save mode the GPS is inactive so, in order to fi nd position faster the fi rst time, the
brown cable 11 should be connected to +, witch will prevent the power save mode, until
position is found and the red GPS LED starts blinking.
Yellow GSM LED blinks when the SBX-3 is in contact with the GSM-net.
Green SYS LED blinks when the SBX-3 is in operation.
During power up the LEDs indicate one or both of the following functions:
GPS LED GSM LED SYS LED Function
On Off Blinking SIM card is read
Blinking Off On SIM card is initialized with
basic settings
More information under Programming the SIM card.
C
1
4
7
*
2
5
8
0
3
6
9
#
Under the top lid of the main unit there are four LEDs,
a slot for the SIM card and a button for pairing a new
remote controller to the main unit.
SBX-3 has an automatic power saving function. When it
enters the power saving mode, all LEDs are off and GPS is
powered down. To exit the power saving mode, press the
unlock key on the remote control.
The red GPS LED is on when the GPS is connected to the
unit but no position can be found.
English
SETUP MANUAL
SIM card in users mobile phone
The SBX-3 must identify incoming calls and SMS in order to
authorise an action or response. To do that, it use the Caller
ID function. Some types of SIM cards, such as an extra card
to a subscription (Telia Duo), does not provide the Caller ID
function and can not be used to call the SBX-3, it can only
send SMS.
SIM card
holder
Remote
learning
button Learning
process
LED