background image

General Care:

Cover cleaning instructions

• Hand wash at max 30° - do not wring.

• Do not iron.

• Do not bleach with chlorine.

• Do not dry clean, do not use solvent.

based stain removers.

• Do not tumble dry.

• The hood may be spot cleaned in situ

with a mild detergent solution and allowed

to air dry.

Maintenance

• This product requires a small amount of

maintenance. Cleaning and maintenance

must only be carried out by adults.

• Keep all moving parts clean and if

necessary lubricate them with a silicone

based spray.

• Clean the plastic parts periodically with a

damp cloth. Do not use solvents or similar

substances.

• Brush the fabric parts to remove dust.

• Do not clean the polystyrene shock

absorbing device with solvents or other

similar products.

• Protect the product from atmospheric

agents: humidity, rain or snow. Extended

exposure to sunshine can cause colour

changes in many materials.

• Store the product in a dry environment.

Cleaning the seat:

• The harness and plastic parts can be

sponged with very mild detergent and warm

water.

• Do not use chemical cleanser, bleach,

corrosives on any part of the seat.

For all technical queries please call:

01454 326 568

Imported by:

The Red Kite Baby Co Ltd

35 Lavenham Road

Beeches Industrial Estate

Yate

Bristol

BS37 5QX

Содержание Savanna













Отзывы: