2. Insert the assembled long legs into the corresponding slots on the bottom of the
seat panel ensuring that L1 and R1 are both at the front of the seat panel. Fig 2.
3
6. Insert backrest into seat panel.
7. Install the tray
8
3. Attach the side frames with
the small silver push pins facing
inwards to the higher holes on
the front legs and secure with 2
bolts. Fig 3.
4. Connect the rear frame
to the ends of the side
frames and attach to the
lower rear legs with the
remaining 2 bolts. Fig 4.
5. Press in the push pins on the
front of the side frames and
push on the footrest until it
clicks in place. Fig 5.
6. Push the seat firmly on to the seat panel until it clicks in place. To remove the seat,
push in the buttons through the seat panel and lift the seat upwards. Fig 6.
7. Pull the catches on the underside of the tray to the side and slide it on to the seat.
You can choose 3 different tray positions by pulling the catches and sliding the tray
back and forth to the desired position. Fig 7. Your highchair will now look like Fig 8.
Insert
R
R
L
L
L1
R1
R1
L
L
R
2
L1
5
4
L
L
2 holes
L1
L1
R1
R1
R
R
Press and lift
Press
Tray
button
catches
