Assembly instructions
To open the walker
1. Open the play centre by raising the tray to the highest position. Gently push down on the top section to ensure it has locked in
place.
Fig 1a + 1b
To attach the seat unit
2. Position the seat rim in to the frame and push firmly down until it locks in place. Fig 2.
To attach the Whale toy
3. Push the Whale in to the centre of the toy tray to lock it in place. Press button G to release the toy. Fig 3.
To attach the musical tray
4. Slot the tray in to the recess on top of the play centre and secure in place by turning the keys underneath 90 degrees. Fig 4.
To attach the Butterfly and Octopus toys
5. Push the toys in to the slots and rotate the base of the toys 90 degrees to lock them in place. Fig 5.
To attach the toy bar
6. Push the toy bar in to the slots and rotate the base of the bar 90 degrees to lock them in place. Fig 6.
To use the rear walking handle
7. Remove the toy bar. Slot the handle in to the holes and secure with the nuts underneath. Fig 7.
To lock the seat unit
8. Ensure the seat unit is facing forward and push the locking tab in to the groove on the underside of the seat rim to lock the seat.
Pull the tab out to allow the seat to rotate. Fig 8.
Height adjustment
9. Push the red safety catch upwards (1), then the white release catch inwards (2). The top section can now be lowered in to one of
three height settings or fully folded for storage. Fig 9.
To select rocking mode
10. Slide the locks (a ) towards the edges (fig 10a) , rotate 90 degrees and then release the locks. Fig 10b.
Attaching the padded foot mat
11. When in rocking mode, you can clip the foot mat on to the bottom frame of the walker. Fig 11.
