REDHEAD RH360, Руководство пользователя

Страница: 13 / 20

13
TESTING
To Test the Electronic Stimulation:
1. Place the tester firmly on the contacts of
the Collar Receiver.
2. Set the intensity (note - an intensity level
setting of 4 or less might not be enough to
light the tester).
3. Push the ‘ Cont. ’ button.
4. The tester light will light repeatedly when
the Continuous Stimulation button is pushed (the test
light will be brighter at higher intensity levels).
To Test the Beep:
1. Press the ‘ Beep ’ button.
2. An audible beep will be emitted any time the button is
pressed.
NOTE: Turn the Collar Receiver ON for Testing
NOTE: If the Collar Receiver is not responding to any sig-
nals from the Transmitter, the Collar Receiver may need to
be reprogrammed to the Transmitter (see page 14 ).
* Charging Error - If the SmartLED has a long blink every
other second while charging, the rechargeable battery pack
will need to be replaced. Contact D.T. Systems if the
problem persists after a few charging sessions.