Redgum BASICS B4204S Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 20

Redgum BASICS B4204S Скачать руководство пользователя страница 16

redgumbrand

.com.au

13.

PRODUCT CARE

- INSPECTIONS / CLEANING

INSPECTIONS

We suggest that the

Seat Walker

is visually checked periodically for signs

of damage or wear prior to use. Overall check the following:
- Frame has no distortion.
- Plastic components (brakes / handgrips etc) are not damaged or cracked.
- Brakes work as required. (Refer to page 10. for brake adjustment information)
- Seat is not damaged or split.
- Wheels are not damaged and spin freely (remove any hair or lint).

Withdraw the Seat Walker immediately if you suspect

damage or any other fault. If in any doubt, please do not issue or use,

but immediately contact your supplier for service support.

CLEANING

Clean the Seat Walker

using a

non-abrasive cleaner or mild

detergent with a soft cloth.

Abrasive cleaners or abrasive

cleaning pads could damage the

Seat Walker

and should not

be used.

If you have any issues or questions

about the

Seat Walker

please contact your supplier or

BASICS by Redgum direct.

«
...
14
15
16
17
18
...
»

Содержание BASICS B4204S





















Отзывы:

Нет отзывов