15
6.1 ADJUSTING THE WORKING DEPTH OF RAKE
The working depth of the rake can be adjusted by turning the spindles at the front side of the
machine.
Shown version: VT 1200 (The same principle applies to the VT 1800.)
Figure 12
The start procedure is as follows:
!! Make sure that the tractor / Verti-Top is blocked well and cannot move
on its own accord !!
!! Switch off the tractor before descending !!
1.
Turn the spindles until the correct height is achieved
(Figure 12, A)
.
2.
At both sides of the machine, adjust the rake at the same
height. For this purpose, use the indication stickers
(Figure 12, B)
.
NEVER
adjust the machine in such a way that it could damage the subsoil.
! IMPORTANT !
First check the working depth on the subsoil statically before using the machine!
