10
4.5
AFTER USING THE VERTI-SPRAY
If you have sprayed chemicals, the Verti-Spray should be rinsed thoroughly with clean water.
If the Verti-Spray is stored at temperatures lower than 0ºC, the tank of the Verti-Spray should
be drained completely. Opening the cap of the tank (A in Figure 2) and disconnecting the two
hoses from the pump (A and B in Figure 3) will drain the tank.
0
5.0
TROUBLE SHOOTING (PROBLEM ANALYSIS)
Problem
Possible cause
Solution
The nozzles do not spray liquid or spray
too little liquid.
Nozzles are blocked.
Leakage in hoses / connections
Tap is closed.
Filter is blocked.
Bent hose
Dismantle the nozzles and spray with
compressed air.
Renew the hoses.
Open the tap.
Disassemble and clean the filter.
Remove the bend / renew the hose.
The pump does not function.
Electrical circuit
Damaged pump
Jammed pump
Have a professional examine this.
Replace the pump.
Clean or replace the pump.
