Redexim
16
The start procedure is
VERY
important. Follow the described procedure, because otherwise the
Speedseed can get damaged.
1. Fill seeds into the hopper.
2. Adjust the gearbox to the type of seeds that should be sown.
!! Make sure that the Speedseed and the tractor cannot move while you are setting
them !!
3. Drive to a spot where the machine will be used.
4. Drive slowly forward and lower the Speedseed slowly until the machine drives
completely on the ground.
5. Increase the speed to the required speed.
!! The maximum working speed is 12 km/h. Higher speeds are not recommended and
can cause damage to the Speedseed !!
9.3. Stop sowing
1. Reduce the speed.
2. Lift the machine off the ground.
3. Drive to the next spot for sowing and start to sow.