8
5. ATTACHING THE BRUSH TO THE RTC TRACTOR
Attaching the RTC Brush on the RTC tractor has to be done carefully. Follow the instructions below:
Figure 2
Prior to attaching the machine, check the following points:
-
Check whether the brush is undamaged and whether it is safe to attach and use.
-
Check if the nuts and bolts of the brush are tightened correct.
-
Check whether all safety stickers are on the machine and whether these are
undamaged and easily readable.
Never
use the machine if it has damaged or
unreadable stickers.
The brush should be attached to the tractor in the following manner: (see Figure 2,3 & 4)
!! Make sure that the RTC tractor is secured and cannot move while you are attaching
the brush !!
!! Switch off the tractor engine before attaching the brush !!
1. Remove the connecting rods
(1)
from the brush assembly.
2. Move the brush under the RTC tractor and center the brush between
the lifting arms
(2)
of the RTC tractor.
