10
4. CONNECTING THE MULTI-SEEDER
For coupling and uncoupling of the Multi-Seeder you must proceed carefully. Follow the
instructions below:
4.1. CONNECTING
Checks prior to connecting the Multi-Seeder:
−
Check the Multi-Seeder for any visual damage, and repair if safe operation of
the machine cannot be guaranteed.
−
Check whether all nuts and bolts have been tightened properly.
−
Check whether all protective covers and safety stickers are in place on the
machine, and whether they are undamaged.
NEVER
use the machine without
them.
The Multi-Seeder can be connected to the tractor using the 3-point hitch. The method is as
follows (Figure 5):
1. Remove the 3-point pins (1).
2. Carefully back up the tractor, so that the lifting arms (2) can be connected to the
frame.
!! Make sure the tractor is secured in place and cannot start moving!!
!! Stop the engine of the tractor before getting off!!
3. Connect the lifting arms (2) to the bottom 3-point pins (1) and secure them using
the included locking pins.
4. Set the stabilizer of the tractor to a 100 mm sideways stroke.
5. Connect the top link (3) to the frame using the top pin (1) and secure using the
included locking pin.
6. Keep extending/retracting the top link until the machine parallel with the ground.
!! Make sure all locking pins are secured!!
7. Start the tractor and lift the Multi-Seeder off the ground.
Figure 5
2
3
1
