5
A
B
23 1/2 in
5 15/16in
A
B
Fan Shrouds
1. From the inside of the combine drill holes for the
top bolt of the fan shroud. Measure & mark hole from
inside flange 23 1/2in and from the bottom 5 15/16in.
Straw Chopper
1. Place a second pallet under the MAV bundle and turn
90 degrees (A). Remove tailboard shipping brackets
and rest tailboard against the loader to ensure it does
not strike the combine during mounting. Raise chopper
to the combine using a fork lift or front end loader (B)
from the back.
2. Mount Redekop chopper in place using original
chopper holes.
Use: (See Appendix 1 Hardware Definitions)
8 - Bolt Flg M12 X 25L
8 - Nut Flg M12
3. Bolt fan shrouds to the sidewall of combine.
Use:
2 - Bolt M8 X 50L
2 - Nut Flg M8
Note:
Be sure that Chopper Door and fan shrouds don’t hook
and bend while lifting chopper into place.
