•
Please keep the headset and mobile phone in the range of 1 meter when
pairing.
•
Make the headset enter into pairing mode (LED is red and blue blinking)
•
Start the Bluetooth function of mobile phone and search for new Bluetooth
devices.
After searched, select “R-888”in the Bluetooth device list.
•
According to indication, enter password or PIN No:”0000”, and press the key
of” Yes” or “confirmed”.
( it depends on the Bluetooth device setting )
•
After successful pairing, select “R-888" in the Bluetooth device list, and
press “connect”.
•
After connect successfully, the blue LED of the headset will keep blinking.
Notes:
•
If the pairing is not successful, please switch off headset firstly, and then
re-pair again.
•
After pairing is successful, paired devices will remember each other. Unless
pairing information is deleted because of new pairing, no need to pair when
use next time. If you want to pair the headset with other devices, please pair it
with the new device according to steps 1
～
6 mentioned above.
•
Multilink technology allows simultaneous connection to two different devices,
just simply repeat the pairing process on both devices.
•
Although WIN7 is a superior operating system with most drivers already
built-in, in some cases this does not cover the various hardware configurations
built into the device (e.g. PC, Note book, Net book etc) from the manufacturer.
In this case, please visit the manufacturer’s web site for the latest Bluetooth
drivers for your onboard Bluetooth device.
3) Re-connecting to a Bluetooth device
•
Automatic connecting
Every time the headset is switched on, it will connect to last connected device
automatically, of course the source device Bluetooth must be on “on” states
•
Manual connecting to last connected HFP device
When the headset is in standby mode and doesn’t connect to any HFP devices,
short press
. ）
button once, it will connect to last connected source device
