Redback® Proudly Made In Australia
4
Enter
Manual Selection Screen
OUTPUT 1
[AUTO] ON OFF
OUTPUT 1
AUTO [ON] OFF
OUTPUT 1
AUTO ON [OFF]
1) Manual select
of output zones
OUTPUT 2
[AUTO] ON OFF
OUTPUT 2
AUTO [ON] OFF
OUTPUT 2
AUTO ON [OFF]
OUTPUT 3
[AUTO] ON OFF
OUTPUT 3
AUTO [ON] OFF
OUTPUT 3
AUTO ON [OFF]
OUTPUT 4
[AUTO] ON OFF
OUTPUT 4
AUTO [ON] OFF
OUTPUT 4
AUTO ON [OFF]
Exit Manual
Zone Selection
Press the UP and DOWN
buttons to scroll up and
down.
Enter
Press the ENTER
button to make your
selection
Menu
Press the MENU
button to exit at any
time.
Fig 3.5
SPECIAL NOTE FOR FIRST TIME USE:
When powering up the unit for the first time it will be necessary to
clear the memory before entering any Station (Event) times. If this is not
done the unit will not operate correctly. To do this use option 4 in the
menu. Refer to the section on “Clearing the Memory”.
Navigate to the “Add or Edit a Station Time” Sub Menu as shown in Fig 3.3. If this is the first time entering this menu the
screen should appear as shown in Fig 3.6. The number “1)” shown is the Station (or Event) number which is highlighted
by a flashing cursor.
3.1.2 Add or Edit A Station Time
This option allows the user to enter the Station (Event ) information which includes the event “Turn on time”, “Duration”
and “Output Zone”.
If this is the first time an Event has been entered the memory will need to be “Cleared” first. To do this follow the
directions in the section “Clearing the Memory”.
1) - DAY
Start @ 00:00:00
Fig 3.6
To set a Zone manually, scroll to the desired zone using the up and down buttons as shown in Fig 3.5 and then press
“Enter” when you reach your selection. When finished scroll to the “Exit Manual Zone Selection” screen and press
“Enter” or press the “Menu” button to exit at any time. (NOTE: For the unit to continue in “AUTO MODE” you must exit
back to the Main Screen.)
SPECIAL NOTE:
If power is removed, all outputs will switch off and all zones will
return to Auto mode once power is restored.
