Redback 1L360R, Инструкция по эксплуатации

Страница: 6 / 12

6
1L360R
TM
OPERATING INSTRUCTIONS
Battery Instructions
To charge this battery pack simply insert the charger plug into the charging
socket on the Li-ion battery pack itself. The LED on the charger is illuminated
red during the charging process and will turn green once the battery is fully
charged.
When the power LED on the keypad flashes, the rechargeable battery pack
needs recharging or standard “AA” batteries need replacing. Note the
charger will only charge the supplied rechargeable battery pack.
Handy Hints
•
Prior to initial use, fully charge the rechargeable battery.
•
If when you insert a battery pack the laser does not power up try re-
loading the battery pack to make sure there is a good connection.
•
Remember the 1L360R can operate using standard “AA” batteries when
rechargeable pack is out of charge or charging.
•
When laser is not going to be used for an extended period of time it is
best to remove both “AA” and Rechargeable pack if installed.
The 1L360R has two battery options either 4 x standard “AA” size Alkaline
or the Li-ion rechargeable pack. For standard 4 x “AA” alkaline operation
simply insert “AA” batteries into standard battery holder in the direction
indicated and slide the holder into battery recess and close the battery
compartment cover.
To use the rechargeable
battery pack first
remove standard pack
if inserted and place
into the same battery
recess in direction
indicated and close the
battery compartment
cover.