Redback 106070Kit Скачать руководство пользователя страница 4

4

Important Safety Information

WARNING:  

Read and thoroughly understand all instructions and 

safety information before assembling or operating the pole saw. 

Failure to do so may cause serious injury or death. Do not allow 

anyone to operate this pole saw who has not read this manual. 

As with all power equipment, a pole saw can be dangerous if 

assembled or used improperly. Do not operate this pole saw if you 

have doubts or questions concerning safe operation. 

Call our customer service department at 

720-287-5182,  

1-877-487-8275, 

 or visit

 

www.redbackpowerusa.com

 if you 

have any questions or concerns about the safe operation of this 

equipment.

Intended Use

The pole saw has been designed for pruning of trees and shrubs

in private sector exclusively. The pole saw is not designed for 

felling of trees. Do not use the pole saw for any purpose other than 

for which it was designed. Any other use is unauthorized and may 

result in serious injury or death.

Personal Protective Equipment

When operating this pole saw it is essential that you wear safety 

gear including goggles or safety glasses, steel-toed shoes and tight 

fitting gloves (no loose cuffs or draw strings). Always wear ear 

plugs or sound deafening headphones to protect against hearing 

loss when operating this mower. Always wear sturdy footwear. 

Never wear sandals, sneakers or open shoes, and never operate 

the pole saw with bare feet. Do not wear loose clothing that might 

get caught in moving parts.

!

WARNING

!

DANGER

Содержание 106070Kit

















Отзывы: