Warnings and Safety Information | 3
WARNINGS AND SAFETY INFORMATION
Save these instructions
— this manual contains important safety instructions.
Do not install the Solar Brackets unless you have read and understood this manual.
Disclaimer:
REDARC accepts no liability for any injury, loss or property damage which may occur
from the improper or unsafe installation or use of its products.
SAFETY MESSAGE CONVENTIONS
Safety messages in this manual include a signal word to indicate the level of the hazard as follows:
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
may result
in moderate or minor injury to the operator or to bystanders.
Read the
message and follow instructions precisely.
CAUTION
Incorrect mounting can cause the panels to become detached during travel, which
causes a safety risk to road users. Ensure that you follow the manual's instructions
for correct installation.
Incorrect installation and mounting of the solar panel can effect the performance of
the solar panel.
Leave adequate clearance around the solar panels to ensure the panels do not become
partially shaded when in-use, and to allow access for maintenance of the panels and
connections.
Two people are recommended to safely lift the solar panels assembly above shoulder
height (e.g. when lifting onto the roof of a vehicle during installation).
The Solar Bracket must have a minimum of three bolts attached to the solar panel. Any less
will result in unsecure and unsafe mounting and may damage your solar panel during travel.
All bolts must have at minimum two threads past the end of the nut.
Always use appropriate personal protective equipment (PPE) when operating power tools.
Required tools for installation:
Philips Head Screwdriver
6 mm Allen Key
Power Drill
6.5 mm Drill Bit
10 mm Spanner
Wire brush/file
