Pub. 42004-545A
telephone VoIP WiFi Telephone Manual
Page 22 of 29
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-545A.docx
03/20
Figure 22. GAI-Tronics Models 540-001/541-001 Strobe Connection Detail
Monitoring and Reporting
Each telephone recognizes and generates several hardware and configuration fault condition alarms.
There are three methods to transmit this information to a remote site:
•
syslog output over TCP
•
SNMP (Simple Network Management Protocol)
•
TMA (Telephone Management Application) software (purchased separately)
Available alarms are:
•
handset integrity loop (if applicable)
•
configuration error
•
cold reset (power cycle)
•
warm reset (internal command)
•
key (stuck button)
•
hook (off hook timeout)
•
register fail (unsuccessful SIP registration)
•
audio path test (speaker/microphone test)
Monitoring and reporting must be configured for the telephone. Refer to Pub. 42004-548 for instructions
(see the Reference Documentation section)
