RED SCARLET-W Series, Руководство по эксплуатации

Страница: 108 / 200

COPYRIGHT © 2016 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON/SCARLET-W
955-0116_V6.1, REV-U | 108
ADAPTIVE PREVIEW QUIET RECORD
NOTE:
Target Temperature only affects standby mode.
Record mode : The camera uses Quiet fan mode. For more information, go to “Quiet” on page 108 .
Standby mode : The camera uses Adaptive fan mode. For more information, go to “Adaptive (Target
Temperature)” on page 107 .
QUIET
The fans self-adjust to maintain the lowest possible noise level in record and standby mode while still cooling
the camera.
MANUAL
Select a speed for the fans in both record and standby modes. The fans self-adjusts to maintain the selected
speeds. The default Maximum Record Speed is 75% and the default Maximum Preview Speed is 75%. The
range for both Maximum Record Speed and Maximum Preview Speed is 25–100%.
POST RECORD DELAY
Select the amount of time that it takes for the fan to switch from record to preview mode.
LENS
LENS TAB
The options displayed on the Lens tab change based on the attached lens mount.
PL MOUNT
Enable Power to Lens : Ensures that the camera powers the lens via the lens mount. This feature is enabled
by default, but the camera saves the last selected setting. Deselect when using a Fujinon
®
T2.9 Cabrio
Premier PL lens. If you disable this feature for the Fujinon Cabrio, re-enable it when using other lenses. For
more information, go to “Fujinon T2.9 Cabrio Premier PL Lenses” on page 210 .
Auto-Detect PL Lenses : By default, this feature is enabled.
Detect Lens : Detects a lens, if one is attached.
CANON AND NIKON LENS SETTINGS
The options below display when a DSMC Nikon Mount or DSMC Canon Mount is installed with a supported lens.
Aperture : Enter the aperture value. The range and default depend on the lens.
Focus : Enter the focal distance. The default value is the value from the lens. The range depends on the lens.
MOTION MOUNT TAB
The Motion Mount menu is only accessible when a DSMC RED MOTION MOUNTis installed. For more information,
see the RED MOTION MOUNT Operation Guide , available at www.red.com/downloads .
MOTOR CONTROL
Use the Motor Control menu to set up the RED 3-Axis Lens Control System. For more information, see the RED
3-Axis Lens Control System Operation Guide , available at www.red.com/downloads .
MAINTENANCE
The Maintenance menu includes: Save Log, Upgrade, Calibrate, Self Test, Restore System, Rediscover, System
Status, and OLPF.