RED MOTION MOUNT OPERATION GUIDE
COPYRIGHT © 2015 RED.COM, INC
955-0013, REV-J | 35
INCOMPATIBLE PL LENSES AND DEVICES
The MOTION MOUNT Ti PL is NOT COMPATIBLE with the lenses and devices listed in the table below:
INCOMPATIBLE PL LENS/DEVICE
FOCAL LENGTH
DESCRIPTION
Angénieux Optimo DP Series
16–42mm T2.8
30–80mm T2.8
DP Series lenses have a flange depth that does
not meet standard specification for PL lenses.
ARRI/Zeiss Standard Speed
12mm T2.1
16mm T2.1
20mm T2.1
24mm T2.1
32mm T2.1
40mm T2.1
The rear flange depth of these lenses are
too wide or too long and interfere with the
MOTION MOUNT.
Cooke S2/S3 Speed Panchro
32mm T2.3
The rear flange depth is too long and interferes
with the MOTION MOUNT glass.
PL-to-B4 Adaptor
N/A
The rear face of the PL-to-B4 Adaptor interferes
with the MOTION MOUNT glass.
RED FOCUS
N/A
The rear face of the RED FOCUS interferes with
the MOTION MOUNT glass.
RED PRO PRIME
18mm T1.8
The extended PL cover ring interferes with the
ridges on the baffle inside the MOTION MOUNT
Ti PL, preventing installation.
COMPATIBLE CANON EF LENSES
The MOTION MOUNT Ti Canon supports all lenses that are compatible with the DSMC
®
Canon Mount.
For more information and a full list of compatible lenses, see the
NON-LINEAR EDITING (NLE) APPLICATIONS
The .R3D files captured using the MOTION MOUNT are compatible with the following applications:
REDCINE-X PRO Build 20.0.0 or later
Adobe
®
Premiere
®
Pro CC or later
Avid
®
Media Composer
DaVinci
®
Resolve
Edius
®
Pro
Final Cut Pro
®
7 or Final Cut Pro
®
X
NOTE
: Final Cut Pro requires Apple
®
Workflow Plugin, available at
Vegas™ Pro