RED EPIC-M DRAGON, Операция Движение

Страница: 101 / 253

TIMECODE
For more information about timecode, go to "Timecode, Genlock, Multi-Camera Setup" on page 170 .
TIMECODE
SOURCE MODE DESCRIPTION
User
Provided
(Internal) Use Real Time
Clock (RTC) Uses the internal Real Time Clock as the timecode counter source. You can set the
hours, minutes, and seconds in the numerical boxes on the screen.
Set Manually Define a custom value as the timecode counter seed. Set the hours, minutes, and
seconds in the numerical boxes on the screen.
External:
BRAIN Varies by
device Uses the timecode from an external device connected to the timecode connector on
the camera.
External:
Rear
Module Varies by
device Uses the timecode from an external device connected to a Pro I/O Module or a
REDCAST Module.
LTC OUT
The LTC Out (linear timecode out) check box is only available when a Pro I/O Module is attached. Select the LTC Out
check box to output the linear timecode signal generated by the camera through the timecode (TCODE) port on the
Pro I/O Module.
NOTE: If jamming camera timecode to a timecode device, ensure that LTC Out is disabled.
SLATE
Use the Slate menu to add metadata to clips. After configuring the following fields, the information populates in the
Media menu when formatting media:
Cam ID
Cam Pos
NOTE: The scene name is limited to eight (8) characters.
AUTO-INCREMENT TAKE
To automatically increment the take number when the camera stops recording, follow the instructions below:
1. Go to Menu > Settings > Project > Slate > Scene .
2. Enter a value in the
Take box.
AUTO SLATE
Frame values for Auto Head Frames and Auto Tail Frames on the Auto Slate tab, these values only show in-
camera. The Auto Head Frames and Auto Tail Frames metadata values are currently disabled in REDCINE-X PRO.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC 9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 1 0 1
EPIC/SCARLET OPERATION GUIDE