RED DSMC DRAGON, Руководство по эксплуатации

Страница: 101 / 197

RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0020_V5.2, REV-G | 101
GYROSCOPE AND ACCELEROMETER CALIBRATION
The internal three-axis gyroscope and three-axis accelerometer need to be calibrated for the Horizon overlay
to function properly. The Gyro/Acc calibration file is stored in the flash memory of the BRAIN, so you DO NOT
need to recalibrate after restoring the camera or upgrading firmware. For more information, go to “Horizon” on
page 60 .
To calibrate the Horizon overlay, follow the instructions below:
1. Turn on the DSMC and place it on a level surface.
2. Wait for the camera core temperature to reach room temperature.
3. Go to
Menu > Settings > Maintenance > Calibration > Gyro/Acc and select Low Temperature Calibration .
4. After the calibration finishes, wait for the camera core temperature to reach maximum operating temperature.
5. Once the camera core is at maximum operating temperature, select
High Temperature Calibration .
LENS CALIBRATION
There are a quantity of electronic lenses that are compatible with the DSMC Canon Mount or DSMC Nikon
Mount, but are not electronically supported by the DSMC. The Lens Calibration feature allows you to create
custom lens configuration files for these electronic lenses so that you can use rack focus and autofocus.
A custom configuration file might not make an unsupported lens as precise as a fully supported lens. However,
a custom configuration file provides the F stop range and focal lengths so that you can electronically control
the lens with the camera.
NOTE: The camera may not be able to calibrate some electronic lenses.
NOTE: The camera does not create calibration files for lenses that are already electronically supported. For a full
list of supported lenses, go to “Lens Mounts and Lenses” on page 182 .