Red Sea Reefer Скачать руководство пользователя страница 7

RED SEA REEFER™ Skimmer

8

Important Safety Instructions

PLEASE READ AND FOLLOW ALL SAFETY 
INSTRUCTIONS

DANGER: To avoid possible electric shock, special care should be taken 
when handling a wet aquarium. For each of the following situations, do 
not attempt repairs yourself; return the appliance to an authorized service 
facility for service or discard the appliance.

WARNING: To guard against injury, basic safety precautions should be 
observed, including the following:

a.  Do not operate any appliance if it has a damaged cord or plug, if it is 

malfunctioning, or if it is dropped or damaged in any manner.

b.  To avoid the possibility of the appliance, plug or receptacle getting 

wet, position the Skimmer to one side of a wall mounted receptacle to 
prevent water from dripping onto the receptacle or plug. A “drip loop”, 
as shown in the diagram should be arranged for each cord connecting 
an aquarium appliance to a receptacle. The drip loop is that part of 
the cord below the level of the receptacle or the connector. Use an 
extension cord if necessary to prevent water traveling along the cord 
and coming into contact with the receptacle.

c.  If the plug or receptacle does get wet, DO NOT un-plug the cord. 

Disconnect the fuse or circuit breaker that supplies power to the 
appliance. Then, unplug the device and examine for presence of water 
in the receptacle.

d.  Close supervision is necessary when any appliance is used by  

or near children.

e.  To avoid injury, do not contact moving parts.

f.  Always unplug an appliance from an outlet when not in use, before 

putting on or taking off parts, and before cleaning. Never pull the cord 
itself to remove the plug from the outlet. 

Grasp the plug firmly and pull to disconnect.

g.  Do not use an appliance for anything other than its intended use. 

The use of attachments not recommended or sold by the appliance 
manufacturer may cause an unsafe condition.

h.  Do not install or store the appliance where it will be exposed to the 

weather or to temperatures below freezing point.

i.  Make sure an appliance mounted on a tank is securely installed before 

operating it.

j.  Read and observe all IMPORTANT notices on the appliance.

k.  If an extension cord is necessary, a cord with a proper rating should be 

used.

SAVE THESE INSTRUCTIONS

Drip loop

Содержание Reefer

















Отзывы: