OPERATING INSTRUCTIONS
FOR SG30TRX USERS
OPERATOR MUST BE TRAINED
1)
DO nOT
allow any person to operate the stump
grinder without first reading and understanding
the safety precautions and operating
instructions.
knOW The COnTrOLS anD
hOW TO STOP The STUmP grinDer in CaSe Of
an emergenCY
2)
neVer
allow
ChiLDren
or
UnTraineD aDULTS
(must be 18 years or
older),
to operate the stump
grinder
3)
PPe (PerSOnaL
PrOTeCTiOn
eqUiPmenT) iS manDaTOrY
Before operating this machine.
aLWaYS
wear protective clothing when operating the stump
grinder. This includes, but not limited to; safety glasses,
loose fitting gloves, steel capped boots, safety face
shield, hard hat, high visibilty safety vest and hearing
protection. Never wear loose fitting clothing or jewelry
when operating the stump grinder. Keep all clothing away
from moving parts. Clothing could become caught in the
machine resulting in injury.
4)
aLWaYS
operate the stump grinder in a well-lighted area
5)
neVer
operate the stump grinder on an
angle that exceeds 15º degrees.
Always
keep your work area clear and free of
debris.
6)
neVer
operate the stump
grinder when fatigued.
aWaYS Be aLerT!
If
you get tired while operating the stump grinder take a
break. If you have any type of physical or mental condition
that may be aggravated by strenuous work, consult with
your physician before operating this piece of equipment.
neVer OPeraTe The STUmP grinDer UnDer
The infLUenCe Of meDiCaTiOn, aLCOhOL
Or DrUgS.
7)
USE EXTREME CAUTION when
reversing the stump grinder.
8)
DO nOT
allow other adults, children or
animals near the stump grinder.
iT iS The
reSPOnSiBiLiTY Of The OPeraTOr
to keep bystanders and animals a minimum
of 6 metres (18ft) away from the stump grinder while
in operation.
SAFETY PRECAUTIONS FOR SG30TRX USERS
USE COMMON SENSE AND
PLENTY OF IT
OPERATOR MUST BE TRAINED
saf
et
y
IS EVER
YBOD
Y’S BUSINESS
...no
w
saf
et
y
IS EVER
YBOD
Y’S BUSINESS
...no
w
saf
et
y
IS EVER
YBOD
Y’S BUSINESS
...no
w
saf
et
y
IS EVER
YBOD
Y’S BUSINESS
...no
w
use the rotary
hoe in a well lighted area.
MAXIMUM ANGLE
OF OPERATION
DO NOT EXCEED
15º ANGLE
OPERATION
You alone know the operational demands and
special conditions affecting the equipment in
your situation and therefore assume the
responsibility for developing, carrying out, and
enforcing the safety concepts which apply to your
own operation to effect the greatest safety for
yourself and the people around you.
MAXIMUM ANGLE
OF OPERATION
DO NOT EXCEED
15º ANGLE
OPERATION
BEFORE USE
1)
Inspect the immediate area and
remove any foreign objects from
the area.
2)
Identify and mark the location of sprinkler heads,
gas pipes, telephone cables, electrical cables,
fences, etc.
3) Check the fuel level, oil level, air filter and hydraulic fluid
level before starting the this machine.
4)
angLe Of OPeraTiOn
. Do not
exceed an operation angle greater
than
15 degrees.
Make sure that the
oil in the crankcase is at the top level
before starting.
USe eXTreme
Care When OPeraTing ThiS
maChine On anY angLe.
wear loose
parts. Items could become caught in the machine,
P/N 1301-0075
9)
aLWaYS keeP YOUr
hanDS, feeT anD BODY
aWaY frOm The grinDing
ZOne/area WhiLe The engine iS rUnning.
Immediately
STOP The grinDing DiSC
if a
bystander comes to close.
10)
neVer
operate the stump grinder without the
safety guards in place and in good working
order. Always keep the stump grinder well
maintained and in good working order
11)
aLWaYS STOP
the engine immediately if a
hydraulic leak occurs.
neVer
operate this
machine with frayed, kinked, cracked or
damaged hoses, fittings, or tubing.
12)
DO
nOT
LeaVe
The
STUmP
grinDer
UnaTTenDeD WhiLe The engine iS rUnning.
13)
DO nOT
over speed the engine or alter the governor
settings. Excessive speed is dangerous and will shorten
engine life.
14)
neVer OPeraTe The STUmP grinDer
in an enCLOSeD area.
Engine exhaust
contains carbon monoxide, an odourless and
tasteless poison that can kill
15)
STOP
the engine, disconnect the spark plug
leads and allow engine to cool before inspecting
or performing maintenance
16)
refUeLiing
* Shut off engine. DO nOT refUeL an
engine WhiLe OPeraTing maChine!
* aLLOW
engine to cool down.
Minimum 5 minutes
* USe UnLeaDeD fUeL OnLY
* USe CLean freSh UnLeaDeD fUeL
* Do not mix oil with unleaded fuel
* Do not over-fill fuel tank. Allow space for
fuel expansion
* Do not smoke
* Allow no naked flame or hot material in
refuelling area
* Use only approved fuel containers and funnels.
rememBer fUeL iS a POTienTiaL fire
haZarD/hanDLe WiTh CaUTiOn.
DO NOT
rotary hoe. It is up to the operator to keep
bystanders and animals a minimum of 6
metres (20’) away from the machine while in
“Call before you cut”
fuel expansion.
* Use only approved fuel containers and funnels.
© Copyright 2015, Red Roo Sales & Service Company Pty. Ltd.
DIS
CHA
RGE
ZONE
G R I N
D I N G Z O N E
G
R
I N
D
IN
G
Z
O
N
E
Track
Drive
Fuel
Tank
Engine
Start
Stop
Switch
Track
Controls
Grinding Disc
Operator
Controls
Throttle Cable
Control
Remote Air Filtration
Grinding Disc
Hydraulic
Tank
Lifting Point
Engine Exhaust
Engine
OPERA
TOR
ZONE
DIS
CHA
RGE
ZONE
