red lion PAX LITE PAXLCR00 Скачать руководство пользователя страница 5

Страница: 5 / 12

4.0 R

EVIEWING THE

RONT

UTTONS AND

ISPLAY

RST

SEL

PAR

BUTTON DISPLAY MODE OPERATION

PROGRAMMING MODE OPERATION

PAR

Access Programming Mode

Store selected parameter and index to next parameter

RST

SEL

Resets count display(s) and/or outputs

Index display through enabled values

OPERATING MODE DISPLAY DESIGNATORS

“A” - Counter A value
“B” - Counter B value (dual count or batch)

- Rate value is displayed with no designator

“SP1” - Indicates setpoint 1 output status.
“SP2” - Indicates setpoint 2 output status.

Pressing the

SEL

button toggles the meter through the selected displays. If display scroll is enabled, the display will toggle automatically every four seconds between

the enabled display values.

Advance through selection list/select digit position in
parameter value

Increment selected digit of parameter value

PROGRAMMING MODE ENTRY (PAR BUTTON)

It is recommended all programming changes be made off line, or before

installation. The meter normally operates in the Display Mode. No parameters
can be programmed in this mode. The Programming Mode is entered by
pressing the

PAR

button. If it is not accessible, then it is locked by either a

security code or a hardware lock.

MODULE ENTRY (SEL & PAR BUTTONS)

The Programming Menu is organized into four modules. These modules group

together parameters that are related in function. The display will alternate between



and the present module. The

SEL

button is used to select the desired module.

The displayed module is entered by pressing the

PAR

button.

MODULE MENU (PAR BUTTON)

Each module has a separate module menu (which is shown at the start of each

module discussion). The

PAR

button is pressed to advance to a particular

parameter to be changed, without changing the programming of preceding
parameters. After completing a module, the display will return to

 

Programming may continue by accessing additional modules.

SELECTION / VALUE ENTRY

For each parameter, the display alternates between the present parameter and

the selections/value for that parameter. The

SEL

and

RST

buttons are used to

move through the selections/values for that parameter. Pressing the

PAR

button,

stores and activates the displayed selection/value. This also advances the meter to
the next parameter.

For numeric values, the value is displayed with one digit flashing (initially

the right most digit). Pressing the

RST

button increments the digit by one or the

user can hold the

RST

button and the digit will automatically scroll. The

SEL

button will select the next digit to the left. Pressing the

PAR

button will enter the

value and move to the next parameter.

PROGRAMMING MODE EXIT (PAR BUTTON)

The Programming Mode is exited by pressing the

PAR

button with





displayed. This will commit any stored parameter changes to memory and
return the meter to the Display Mode. (If power loss occurs before returning to
the Display Mode, verify recent parameter changes.)

PROGRAMMING TIPS

It is recommended to start with Module 1 and proceed through each module in

sequence. When programming is complete, it is recommended to record the
parameter programming and lock out parameter programming with the user input
or programming security code.

FACTORY SETTINGS

Factory Settings may be completely restored in Module 3. This is useful

when encountering programming problems.

ALTERNATING SELECTION DISPLAY

In the explanation of the modules, the following dual display with arrows will

appear. This is used to illustrate the display alternating between the parameter
on top and the parameter’s Factory Setting on the bottom. In most cases,
selections and values for the parameter will be listed on the right.

Indicates Program Mode Alternating Display

Factory Settings are shown.

Parameter

Selection/Value









5.0 P

ROGRAMMING THE

ETER

Parameters