ET-18MG-MIL_manual.r04.doc
Page 5 of 12
Last Revised: 17-Dec-13
Section 2
Mechanical Dimensions and Installation
Overview
The switch is designed to be mounted into a typical 19” rack. Use the mechanical diagram
below as a reference guide when installing the switch. The mounting ears are included and
pre-attached to the switch. They may be removed and reversed as desired.
1.75"
[44.4]
SIXNET
Military Ethernet
Rack Switch
Shown with cap installed (tether not shown)
Make sure to allow enough room for the
desired plug, backshell and wiring
1
2
3
4
5
6
7
Console
LED
Gigabit
GND
Power
8
9
10
11
12
13
14
Ø0.25"
[Ø6.4]
15
16
17.32"
[439.9]
14.17"
[359.9]
16.67"
[423.4]
18.32"
[465.3]
18.62"
[472.9]
1.25"
[31.8]
