1
RJ-11 DIMENSIONS In inches (mm)
RJ ADAPTERS & CABLES
Bulletin No. DRRJ-C
Drawing No. LP0554
Released 7/03
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion-controls.com
DRRJ11T6 and DRRJ45T8 Connector to Terminal Adapters
MODEL
DESCRIPTION
PART NUMBER
CBJ
CBL
DRRJ
RJ-12 to RJ-12 10' Cable
RJ-45 to RJ-45 6" Jumper Cable
RJ-45 to RJ-45 10' Cable
RJ-45 Connector to Terminal Adapter
RJ-12 to RJ-12 1' Cable
RJ-45 Parallel Connector
RJ-11 to RJ-11 6" Jumper Cable
RJ-45 to RJ-45 1' Cable
RJ-11/12 Connector to Terminal Adapter
CBLRLC02
CBLRLC07
CBLRLC04
DRRJ45T8
CBLRLC01
DRRJ45P6
CBJ11BD5
CBLRLC03
DRRJ11T6
ORDERING INFORMATION
APPLICATION EXAMPLES
RS485 via RJ-11 connector and DRRJ11T6
Product Examples: DLC, IAMS, ITMS, and PAX.
A Red Lion Controls device with an RS485 RJ-11 port is connected to the
DRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is then
wired to run the RS485 MODBUS serial information to another device.
A Red Lion Controls device with an RS232 RJ-12 port is connected to the
DRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminal
block is then wired to run the RS232 serial information to another device.
RS232 via RJ-12 connector and DRRJ11T6
Product Examples: G3, Modular Controller, and Paradigm (CL,
CX, GL, TX, and VX)
DESCRIPTION
These adapters convert modular RJ-style connectors to terminal
block connectors, providing a rugged means by which standard
shielded cabling can be used in lieu of flat, unshielded cable. The
DRRJ11T6 can be used with RJ-11 or RJ-12 cables, while the
DRRJ45T8 can be used with RJ-45 connectors. The adapters are
designed to mount on any standard DIN rail.
Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14
to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for the
screw-terminals correspond directly to the terminal pin out of the RJ
connector. There is an extra terminal on each block labeled “S” for the
connection of shields.
