red lighting Quadro B24, Руководство пользователя, Страница: 4 / 10

INSTALLATION INSTRUCTIONS
Mounting the device
QUADRO B24 can support power supply from 110V to 230V so you need to be sure to connect
the machine with the correct voltage.
The applicable temperature is between 0°C
～
45°C Do not use the lighting under or above the
temperature.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
The installation must be secured with a secondary safety attachment, an appropriate safety rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
The operator has to make sure the safety relating and machine technical installations are approved
by an expert before taking the device into operation for the first time.
These installations have to be approved by a skilled person once a year.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
Overhead mounting requires extensive experience, including amongst others calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the device. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injury.
Before mounting make sure that the installation area can hold a minimum point load of 10 times the
device’s weight.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so
will void your manufactures warranty. In the unlikely event your unit may require service please
contact the manufacturer or your dealer.