red lighting QUADRO 24, Руководство пользователя

Страница: 5 / 7

Function Mode Set
:
When the performer is switched on, the LCD display will appear Red Lighting ,please press
any key to enter into the Function Menu. You can choose function by pressing UP or DOWN,
→
arrowhead shows current operation position. Press ENTER or EXIT to enter or return into the
current function.
Detailed operating way as below:
1
：
DMX512 Control Mode :
qqqq
Press UP or DOWN to set the address
，
Press EXIT to return.
2
：
Automatic Control Mode :
When showing
→
Show 00, Press UP
、
DOWN choose effects
，
Press EXIT to return.
Automatically run all effects -----Show 00
Gradually color change effect-----Show 01
RGB color change effect-----Show 02
Single color flash effect-----Show 03 to Show 09
RGB color change flash effect-----Show 10 to Show 18
RGB sever colors selection-------Show 19 to Show 25
When showing
→
Speed80, Press UP
、
DOWN to choose speed, press EXIT to return.
3
：
Color set :
Press UP or DOWN to choose current -setting colors,press ENTER to adjust the color
proportion for R
、
G
、
B three basic colors.Press EXIT to return.
Press UP or DOWN to choose whether to comeback the color set ex-factory,press ENTER to
confirm,press EXIT to return.
4
：
Master set :
Press UP or DOWN to choose whether the master has been Turned On or Not
，
Press ENTER
to confirm, Press EXIT to return.
→
DMX
Auto
Enter
→
Address
001
Enter
Address
→
001
DMX
→
Auto
Enter
→
Show 00
Speed80
Enter
Show 00
→
Speed80
→
R 255
G 255
Enter
→
RGB
R
Enter
→
Color
Master
ON
→
OFF
Enter
GB
→
Default
ON
→
OFF
Enter
Color
→
Master