Red Hat NETWORK WORKGROUP, Руководство пользователя

Страница: 16 / 84

16 Chapter 2. Red Hat Network Registration Client
2. On the KDE desktop, go to the Main Menu Button (on the Panel) => Red Hat =>
System => Red Hat Network
3. Type the command
rhn_register
at a shell prompt (for example an xterm or gnome-
terminal)
4. If you are not running the X Window System, type the command
rhn_register
at a
virtual console or remote terminal. Please refer to Section 2.7 for further details.
Caution
You must use Python 1.5.2-24 or later with Secure Sockets Layer (SSL) support. If not, the infor-
mation you transfer will not be encrypted. If you have an earlier version of Python, you will see the
message shown in Figure 2-1. To determine the version of Python on your system, use the command
rpm -q python
. It is strongly recommended you use Python 1.5.2-24 or later.
Figure 2-1. Use Python 1.5.2-24 or later
The opening screen for the
Red Hat Network Registration Client
gives you a brief overview
of the services available and the steps required to register (see Figure 2-2). Click Next to
continue with the registration process. If you click
Cancel
, the registration process will end
and no information will be sent.